Painting Contractor Somerville MA

Over 25 Years Experience With High Quality Indoor & Outdoor Painting

Painting Contractor Somerville, MA


Call Our Somerville, MA Office For A Free Painting Estimate,

Popular Service Areas


Painting Contractor Of Somerville MA

It is important to have cohesion between the surface and paint colors. The little details of the surface preparations determine the painting outcome. Extensive preparations may be required to prepare a wall for painting but it is worth it in the end.

The next section of this article will discuss the steps involved in preparing a wall for painting.

Steps For Preparing Walls For Painting

1. Surface Washing

Grime often forms on exterior surfaces. The painting contractor of Somerville MA will thoroughly rinse the exterior walls with water and anti-mold solution. The surface is then allowed to dry completely to enable the paint to adhere properly onto the surface instead of adhering to the grime and mildew

Interior surfaces are easier to deal with as they don’t require thorough washing like exterior surfaces. Residues from the wall can be cleaned up with soapy water solution and soap. Kitchen grease and smoke stains can be cleaned up using trisodium phosphate.

2. Surface Scrapping and Sanding

This is done for interior and exterior surfaces that were previously painted. The painting contractor of Somerville MA will need to thoroughly scrap off previous paint with a long strike to get rid of blistering, cracking and old flaking paint. This is to eliminate any surface defect. Watch this video on how to sand a wall:

Sanding is done gently with sandpaper after scraping to make ridges or dents smooth so that there can be sound edges. This makes the surface even for better finishing.

3. Base Coating/ Surface Filling

Small imperfections such as nail heads and patch holes can be concealed with filling knives and joint compounds to remove any smudges from the surface. Once the surface is filled, sanding is done to achieve a sound edge. Cracks on the surface can be concealed with base coats and brushes of rollers. It is advisable to use two thin patch coats instead of one.

4. Priming

A good exterior primer must be used on exterior surfaces to prevent any chemical reaction and moisture from mixing with the substrate. A single coat of primer is adequate for new unpainted exterior surface. But for old exteriors surfaces, the painting contractor of Somerville MA will use acrylic polymer primers.

Depending on the type of finish the homeowner wants, the painting contractor of Somerville MA can produce a sleek surface using an acrylic primer or a porous surface using plasterboard primer. Spot priming of stained areas should be done to make the surface completely smudge-free before painting is done. Read more about primers

5. Paint Color Testing

By now the wall is almost ready to be painted. The last thing to do is to test the color selection on the surface. It is advisable for the homeowner to buy a sample pot of shades of the desired colors for effective color testing. The color sample should be painted directly on a small part of the prepared surface. The painting contractor of Somerville MA should put two coats of paint to get a realistic picture. Find out the right way to test paint colors

These are the steps for preparing walls for painting. There is no doubt that wall preparation is very important and must be done correctly for the painting to turn out well.

Why Is Paint Primer Necessary?

Priming is something that must be done by a painting contractor of Somerville MA before layers of paint are applied on walls. It steps the base on which color coats are applied.

Different chemical formulas of pigments and resins are used in primers, unlike regular paint. Adhesive resin is used in primers to help make the wall surfaces smooth while paints have pigments that make it possible to have different colors. Follow to read more about the importance of primers

Why Primer Paint Is Important

Some people overlook priming but it is an essential procedure for both exterior and interior painting. Primer paints make the rugged wall surfaces smoother. If the painting contractor of Somerville MA skips priming, the wall will not turn out to be as appealing as it is supposed to be

The homeowner will get the best quality paint finish for his house if he goes for a reliable and experienced painting contractor of Somerville MA. Below is a description of how primer paint protects the walls.

Firstly, the one-coat polish is made possible with a primer. It is better to have a single coat of wall primer and a coat of regular paint than two coatings with regular paint. Secondly, primer makes that paint job to last long. Without primer, catering, blistering and blotching will occur because primer paint has the ability to make wall surfaces smooth and conceal blemishes. It is hard to paint uneven surfaces and the paint will begin to peel in the long run. There are different colors of primer paint. No matter the shade or tint the homeowner wants to give his walls, it is always good to use primer paint first.

Types Of Primer Paints

Different types of primer paints exist for different painting films. For the homeowner to choose the most appropriate primer paint, he needs to have knowledge of the unique features of different primer paints. Click here to learn how to choose primer paint. Below are the different categories of primer paints.

1. Anti-Stain Primer

This type of primer blocks stains and is needed to keep the plaster wall free from stains and blemish. It comes in two kinds and each has its distinction use both in exterior and interior settings.

The first kind is the oil-based anti-stain primer. This is used for surfaces with a glossy finish. It can conceal any damage done on the wall by moisture and smoke. The second kind of anti-stain primer is water-based or latex primer.

2. Drywall Primer

This type of primer contains mainly polyvinyl acetate and is made especially for porous surfaces. This primer is used to fill ridges and get the drywall ready for top coating.

3. Colored Primer

There are primers with different colors. The colored primers prepare a base for the regular colored paint. With colored primer, the painting contractor of Somerville MA will only apply a few coatings of regular paint. It brings out the color of the paint better.

Priming Different Surfaces

The painting contractor of Somerville MA needs to make sure that the surface is appropriate for the paint primer. The next paragraphs discuss how to choose the right primer for different surfaces.

a. Primer For Bare Wood
It is more challenging to paint wood than any other surface. The role of the primer, in this case, is to stop moisture from accumulating on the surface and also prevent it from getting into the surface. So, a wood primer should be used for bare wood painting. Follow to read an article on how to paint wood.

b. Dry Wood Surfaces
The best primer for dry wood surfaces is oil-based primer because it adheres well to the surface and hold the top coat together.

c. Metal Surfaces
Latex primers are best for metal surfaces. Oil primer is also used because it prevents rust.

d. Patchy Surfaces
Extra attention needs to be given to old patchy porous cement walls because the growth of mildew and mold can occur as a result of the patches. Anti-stain primers are best for this kind of surface.


This type of product contains both the paint and the primer. It makes it possible to seal and cover wall surfaces in one coat. They are best for previously painted surfaces or new drywall. With one coat, decent coverage can be achieved. They come in thick formulations so they are more viscous than normal primers. This means that they cannot be like true primers in terms of performance. If a surface requires a high-performance bond, anti-stain properties or sealing properties, a combined paint and primer produce is not ideal.

Painting Brick Surface: Things To Know

There is no doubt that a new coat of paint can revitalize an old space. Many home improvement professional recommend applying a fresh coat of paint on old brick walls if the homeowner can afford it. Read about brick painting . It might seem like a simple DIY project but there are things to consider before starting the project. The next paragraphs will highlight these things.

Painting Interior vs. Exterior

Professional painting contractor of Somerville MA knows that while it is good to have brightly painted brick walls, it is not an easy feat especially on exterior walls. Because the exterior bricks are constantly exposed to the elements, they should be free of mold, mildew and dirt before painting is done. If mold is not removed before painting, it will continue to grow under the painted surface. All efflorescence should be removed with a wire brush to make sure the surface is cleaned properly. Efflorescence is the white powder that forms on brick surfaces.

The exterior should be power washed with a high-quality cleaning solution. If there are still residues, the painting contractor of Somerville MA will sandblast the bricks to make sure it is cleaned. The bricks should be allowed to dry for several days after washing to prevent efflorescence from re-emerging on the wet walls. This can cause the paint to crack and peel. All cracks should be fixed and brick conditioner should be applied based on the overall quality of the exterior surfaces.

A quality paint job can completely transform the home and protect the walls from mold and fading. This project requires careful preparation and continuous maintenance. Homeowners who are planning to do these themselves should consult a painting contractor of Somerville MA before starting the project.

The Pros And Cons Of Interior Brick Painting

It is much easier to paint interior brick walls. The painting contractor of Somerville MA will still need to remove efflorescence from the surfaces but a milder solution is used for the cleaning and it can be done by hand. The painting contractor of Somerville MA needs to pay attention to the quality of the bricks and make sure that mould and mildew are removed. This offers protection and makes it easy to clean the painted surface. Brick is a porous surface so prosper cleaning and a high-quality paint job is highly beneficial because it makes it impossible for soot and dirt to be trapped within.

Adding a coat of paint to the old fireplace is a great way to reinvent the living space completely and give it a modern look.

Even though it is easy to paint interior surfaces, there is still a lot involved. A lot of work needs to be done to achieve the perfect coat of paint. The correct primer, type of paint and cleaning solution must be purchased. Homeowners planning to do their own painting should note that a paint roller is not enough for the job because the paint will drip in the process. A professional painting contractor of Somerville MA can handle these drips so that they will not be an issue. This is why brick wall painting is best left to the professionals. Watch this video video on how to paint brick:

The homeowner should consider the possibility of changing his mind down the road when it comes to brick wall painting. Once a brick wall is painted, it is difficult to revert to the original.

Although a quality paint job will give added protection to the bricks, it is still necessary to clean and maintain the walls. The walls need to be cleaned regularly because light colored bricks attract and show dirt easily. The paint job will also need to be redone every 4-5 years to maintain its fresh look. As earlier mentioned, the homeowner should consult a professional painting contractor of Somerville MA before starting the project to get property advice on how to paint brick surfaces.

Fixing Peeling Surfaces

Many homeowners encounter issues when it comes to painting maintenance. Harsh weather and humidity often make it difficult to keep the paint job in perfect condition. The common problem is peeling of paint. It can be challenging to keep up with maintenance. Maintenance is required in the long run even for the best paint job because water will still leak into the wood even with primer and paint. That is why homeowners must carry out annual checks to detect any paint peeling because it could indicate a leak or inadequate ventilation. This is necessary to avoid wood rotting. If peeling is detected on time, it will prevent it from spreading and save time when the exterior surfaces will be painted in the future.

The next paragraphs will discuss steps to follow to tackle paint peeling.

1. Identify The Cause Of The Paint Peeling

Paint peeling occurs for a number of reasons. One of the leading factors is humidity because when moisture seeps into the wall, the paint will begin to peel. Bad weather and dirt are other factors that could cause paint peeling. The painting contractor of Somerville MA can give the homeowner more insight into why the paint is peeling.

2. Prepare The Work Area

Once the cause of the peeling has been identified, the work area should be prepared. The painting contractor of Somerville MA should protect himself from lead particles and harmful fumes by warring gloves, safety mask and glasses. The flooring should also be protected by laying down a plastic trap. Furnishings should be removed to avoid damages.

3.Clean And Prepare The Wall

The painting contractor of Somerville MA should begin this process by removing all peeling paint with a paint scraper. When it becomes difficult to scrap the paint away, a wire brush should be used to sweep up the scraped area. The brush should be used over the edges to ensure that there are no more paint peels. If the paint begins to peel again, the first should be repeated.

4. Repair Damages

After all excess paint has been removed; the painting contractor of Somerville MA should focus on the wall itself. All cracks and holes should be fixed by applying a thin layer of concrete and allowed to dry.

5. Smooth Out The Surface.

The surface of the wall should be smoothed out to remove the filler concrete.

6. Prime And Paint The Surface

After smoothening out, the painting contractor of Somerville MA can proceed to prime and paint the surface. Primer and paint should be applied correctly and allowed to dry properly. It may be necessary to apply a second coat of paint when necessary.

These steps should make the painted area to blend with the rest of the paint if done correctly. Watch this tutorial on how to handle peeling paint:

How Often Should Interior Walls Be Painted?

Many homeowners ask painting contractor of Somerville MA how often they should repaint their homes. There is no easy answer to this question because it depends on a lot of factors. Homeowners need to take note of signs that may indicate that the home needs a new paint job. Walls are exposed to various elements that can cause damage to the paint. As a general rule, if a home’s interior is painted by an experienced painting contractor of Somerville MA and the walls are well maintained, the paint job can last for 10 years before a new coat is required according to information available here

A good painting contractor of Somerville MA will use high-quality paint and apply them evenly. He will also ensure that surfaces are well primed before the paint is applied. This is something most DIYers don’t do. They rush the work and the paint job will only last for a short time before it begins to crack. If a homeowner is planning to do his own painting, he should do some research and get the right equipment for the job. This will ensure that he doesn’t make mistakes that he will regret later.

Nevertheless, even if the homeowner or painting contractor of Somerville MA does a good job on the painting, there are certain factors that can reduce the timeline and make into necessary to do a repaint after a few years. These factors are highlighted below.

1. The Part Of The House Involved

Rooms in a home are often repainted separately because different rooms have different timelines for repainting. The hallways and corridors may require regular repainting because those areas are more subject to wear and tear than other parts of the house. These walls may need to be painted as often as every 3-4 years. On the other hand, places like bedrooms don’t require a new coat of paint until after 8-10 years

Dining and living rooms

Are almost like the hallway because they are used regularly although the pieces of furniture in these areas tend to protect the walls and make the paint job last longer. Also, it is not easy to repaint this area regularly because it requires a lot of work such as moving furniture and redecorating with new colors.

2. Sun Damage To Walls

This is a significant factor that affects how long a paint job will last and unfortunately, it is something beyond the homeowner’s control. Areas of the home that are exposed to the sun throughout the day will experience fading faster than shaded areas. This doesn’t happen at once; it’s a gradual process that causes considerable damage in the long run. To protect against this, the homeowner can use blinds and curtains, especially during the summer months.

3. Aesthetics

This is another factor that determines how long a paint job will last. A homeowner can decide to apply a new coat of paint to change the look of the home and he might not want to wait till after ten years.